A Well designed air intake systems provides cool, clean air, for combustion while minimizing inlet air pressure drop to the turbocharger. Normally, this can be accomplished by using engine-mounted air cleaners, but some applications require intake air to be brought in through ducts from outside the engine room. There may also be requirements for special filtration and ducting due to fumes, dust, airborne mists, ambient temperature or even altitude. These requirements should be carefully considered because the inlet restriction that accompanies increased filtration and ducting can cause the engine to be derated and turbocharger life reduced.
Air intake systems using ducted air from outside the engine room should be accessible for routine maintenance and inspection. The System should also be located away from exhaust stacks (including engine exhaust stack), vents or processes that might vent flammable vapors,large concentrations of dirt, chemicals, industrial waste, or any other material that would not allow for cool, clean air. In an optimal design, nominal air temperature around the inlet should be between 15 - 32 Celcius Degree. Inlet Air temperature should not exceed 45 celcius degree for standard ratings.
Cold air intakes are a fairly inexpensive modification (typically a
few hundred dollars) and easier to install than most other engine
modifications. No, they won't add quite as much power as other engine
mods, but they will help your engine in some other ways.
Think of a
factory air intake system as like having a cold that clogs up your head
and restricts your breathing. Now go running. It's not going to work
very well is it? A cold air intake is like amazing medicine that allows
your engine to finally breath. Cold air intakes move the air
filter outside of the engine compartment so that cooler air can be
sucked into the engine for combustion. Cooler air brings more oxygen
(denser air) into the combustion chamber and that means more power. The
filters are usually moved to the upper wheel well area or near a fender
where there is more access to free flowing, cooler air and less hot air
from the engine.
This product come with necessary boots, clamps and hardware for an OE fit and finish. Customer Reviews Customer who installed Spectre Cold air intake in Sierra Car get better fuel economy, better performance, installation was easy, better top to end, and very pleased with the purchased. Another customer installed on Tahoe 2005 in the engine sound was right off. Overall positive feedback from real buyer and most of them recommend for others to purchase.
Cold air intakes are a fairly inexpensive modification (typically a
few hundred dollars) and easier to install than most other engine
modifications. No, they won't add quite as much power as other engine
mods, but they will help your engine in some other ways.
Features and Benefit
No comments:
Post a Comment